TRICKS ON PROBLEMS Overcome RAM
The constraints in computer mengupgarde fraction we experienced so that we become uncomfortable about this, one that we experience is when we are going to want to upgrade the memory (RAM) in this case the memory function is to help improve processor performance is sometimes not appropriate we want an example we want to optimize, improve computer performance instead the opposite is true that computer becomes not optimal, and the performance levels also decreased from 100% to about 25% there is not half right?.
Usually this happens when you mnambahkan new memory or you put two pieces of memory. These problems may be very disturbing us, but you take it easy I'll tell you what the problems that often occur and at the same remedies. Okay next I will explain a good look .........
1. Often Becoming RAM Hangs When On the Add.
Intent above is if we want to add memory / RAM to your PC's performance to be better, but added such as what was not immediately think of a bad course, which added such as this "early Memory type DDR RAM PC-6400 and added one more with a memory chip types of DDR-RAM PC 3200.Nah that makes a frequent hang because unequal relationship between the memory / RAM, and therefore when you want to upgrade the RAM first thing you should do is that you notice first memory of what you'll use or memory of what you use. How to cope with things that were mentioned are as follows:
- Try to attach memory you use on a different slot.
- Consider whether the brand / type of RAM you are using the same type? If this is not the most mobo is a problem because both types RAMnya berbeda.Usahakan also wear the memory capacity, brand / type, and speed of performance is similar to the process will be optimized so it will not lead to HANG.
- Remove one RAM slot in case of HANG, if after having removed the RAM and the computer is no longer HANG, it means there is mismatch / inequalities of the type / types of RAM are both so that there arises a problem HANG.
- But if the RAM is removed when the computer is still often HANG possible problems that occurred not because of a mismatch, but maybe there is a defect in one of the RAM that you have to become unbalanced in the process of performance, then it checks back from the damaged RAM in the RAM where, if you have found a new denganyang replace immediately.
- You can trade one of the two pieces of RAM so that RAM is the same.
2. Ram Not Detected When Added
Halini also can interfere with our course. This picture is an example of the problem as follows. Sized 512MB Ram which was originally added to the same size, the size of which should be increased to 1GB, but when it is detected during boot process is not 512 bertambah.Nah to overcome this is as the following do not forget to Consider a Good okay.
- First do the handling as it did in the previous issue of discussion.
- Possible type of RAM you have is different, not necessarily because RAM is entered on the same slot have the same kind as well. As a picture of "SD-RAM has a slot similar to the RD-RAM, while the RD-Ram will not be detected although it could be installed on the SD-RAM slots or sebaliknya.Jadi to give me a picture like that you probably already know what the cause.
- You better check properly whether the two types of RAMnya same or not as this can cause two problems that I described.
Perhaps this only trick that I can give you hope this trick nermanfaat nagi you who have similar problems.
The constraints in computer mengupgarde fraction we experienced so that we become uncomfortable about this, one that we experience is when we are going to want to upgrade the memory (RAM) in this case the memory function is to help improve processor performance is sometimes not appropriate we want an example we want to optimize, improve computer performance instead the opposite is true that computer becomes not optimal, and the performance levels also decreased from 100% to about 25% there is not half right?.
Usually this happens when you mnambahkan new memory or you put two pieces of memory. These problems may be very disturbing us, but you take it easy I'll tell you what the problems that often occur and at the same remedies. Okay next I will explain a good look .........
1. Often Becoming RAM Hangs When On the Add.
Intent above is if we want to add memory / RAM to your PC's performance to be better, but added such as what was not immediately think of a bad course, which added such as this "early Memory type DDR RAM PC-6400 and added one more with a memory chip types of DDR-RAM PC 3200.Nah that makes a frequent hang because unequal relationship between the memory / RAM, and therefore when you want to upgrade the RAM first thing you should do is that you notice first memory of what you'll use or memory of what you use. How to cope with things that were mentioned are as follows:
- Try to attach memory you use on a different slot.
- Consider whether the brand / type of RAM you are using the same type? If this is not the most mobo is a problem because both types RAMnya berbeda.Usahakan also wear the memory capacity, brand / type, and speed of performance is similar to the process will be optimized so it will not lead to HANG.
- Remove one RAM slot in case of HANG, if after having removed the RAM and the computer is no longer HANG, it means there is mismatch / inequalities of the type / types of RAM are both so that there arises a problem HANG.
- But if the RAM is removed when the computer is still often HANG possible problems that occurred not because of a mismatch, but maybe there is a defect in one of the RAM that you have to become unbalanced in the process of performance, then it checks back from the damaged RAM in the RAM where, if you have found a new denganyang replace immediately.
- You can trade one of the two pieces of RAM so that RAM is the same.
2. Ram Not Detected When Added
Halini also can interfere with our course. This picture is an example of the problem as follows. Sized 512MB Ram which was originally added to the same size, the size of which should be increased to 1GB, but when it is detected during boot process is not 512 bertambah.Nah to overcome this is as the following do not forget to Consider a Good okay.
- First do the handling as it did in the previous issue of discussion.
- Possible type of RAM you have is different, not necessarily because RAM is entered on the same slot have the same kind as well. As a picture of "SD-RAM has a slot similar to the RD-RAM, while the RD-Ram will not be detected although it could be installed on the SD-RAM slots or sebaliknya.Jadi to give me a picture like that you probably already know what the cause.
- You better check properly whether the two types of RAMnya same or not as this can cause two problems that I described.
Perhaps this only trick that I can give you hope this trick nermanfaat nagi you who have similar problems.
No comments:
Post a Comment